The Manager Settings section contains parameters responsible for displaying operations in the manager panel and settings for sending emails.

MANAGER CAN OPEN THE OPERATION "CLOSE THE GENERAL SHIFT"/MANAGER HAS ACCESS TO THE "CLOSE THE GENERAL SHIFT" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "CLOSING A CASH SHIFT" /MANAGER HAS ACCESS TO THE "CLOSE THE CASH SHIFT" OPERATION:

• Да – доступна
• Нет – не доступна.

MANAGER CAN USE THE OPERATION "PINPAD VERIFICATION" /MANAGER HAS ACCESS TO THE "PIN-PAD RECONCILIATION" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "DELETE CHECK" /MANAGER HAS ACCESS TO THE "DELETE RECEIPT" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER IS AVAILABLE OPERATION "STOP LIST" /MANAGER HAS ACCESS TO THE "OUT-OF-STOCK LIST EDITOR" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "STOP LIST OF MODIFIERS" /MANAGER HAS ACCESS TO THE "OUT-OF-STOCK LIST (MODIFIERS) EDITOR" OPERATION:

• Yes – has access
• No – does not have access.

COMBINING MODIFIERS / COMBO COMPONENTS FOR 100%  MATCHING NAME (when the Manager has access to the “Out-of-stock list (modifiers) editor operation” parameter is enabled):

• Yes – in the modifier out-of-stock list, combine modifiers/combo components by 100% name match
• No – in the modifier stop list, do not combine modifiers/combo components by 100% name match.

DISPLAYS ONLY MODIFIERS (WITHOUT COMBO COMPONENTS) (active when the Manager has access to the operation "Out-of-stock list (modifiers) editor" parameter is enabled):

• Yes – in the out-of-stock list of modifiers display only modifiers, do not show combo components

• No – in the modifier out-of-stock list, display both modifiers and combo components.

PRINTING A DUPLICATE CHECK RECEIPT:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "X-REPORT" /MANAGER HAS ACCESS TO THE "X-REPORT" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "Z-REPORT" /MANAGER HAS ACCESS TO THE "Z-REPORT" OPERATION:

• Yes – has access
• No – does not have access.

RESET ORDER NUMBER AFTER CLOSE COMMON SHIFT RESET THE ELECTRONIC QUEUE NUMBER AFTER CLOSING THE SHIFT:

• Yes – reset numbering
• No – do not reset.

MANAGER CAN USE THE OPERATION "TEST PRINTER" /MANAGER HAS ACCESS THE "PRINTER TEST" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "DATE AND TIME DISPLAY" /MANAGER HAS ACCESS TO THE "DATE AND TIME DISPLAY" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "BLOCK KIOSK" /MANAGER HAS ACCESS TO THE "BLOCK KIOSK" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "RESTART KIOSK" /MANAGER HAS ACCESS TO THE "RESTART KIOSK" OPERATION:

• Yes – has access
• No – does not have access.

MANAGER CAN USE THE OPERATION "REBOOT AFTER CLOSING THE COMMON SHIFT" /MANAGER HAS ACCESS TO THE "REBOOT AFTER CLOSING THE COMMON SHIFT" OPERATION:

• Yes – has access
• No – does not have access.

REBOOT THE KIOSK AFTER CLOSING THE COMMON SHIFT:

• Yes – reboot the kiosk after the common shift is closed
• No – do not reboot the kiosk after the common shift is closed.

PASSWORD TO OPEN THE AUTHORIZATION WINDOW – touch password (combination of touch screen presses) to open the authorization window to enter the settings. A combination of one, two, three or four different values ​​is assigned:

• Upper left corner
• Lower left corner
• Upper right corner
• Lower right corner.

The default value is Lower right corner.

LOCK KIOSK:

• Yes - lock the kiosk
• No - unlock the kiosk.

DISABLE SHIFT PASSWORD REQUEST:

• Yes – do not request a shift password when opening the kiosk manager panel
• No – request a shift password when opening the kiosk manager panel.

DISPLAY CURRENT DATE AND TIME ON THE KIOSK:

• Yes – display the current date and time on the kiosk
• No – do not display the current date and time on the kiosk.

EMAIL SENDING SETTINGS (SMTP SERVER HOST) – specify email server host/SMTP server (domain or IP address of the SMTP server).
EMAIL SENDING SETTINGS (SMTP SERVER PORT) – specify email server port/SMTP server port.
EMAIL SENDING SETTINGS (USERNAME) – specify email address/username for authorization on the SMTP server.
EMAIL SENDING SETTINGS (PASSWORD) – specify email server password/user password for SMTP authorization.
MAIL FROM WHICH LETTERS ARE SENT – specify the address from which the temporary password will be sent (must be on the same domain as the smtp server).
MAIL TO WHICH LETTERS ARE SENT — the address to which the temporary password will be sent; you can specify several email addresses for sending notifications (separated by commas).
AUTHORIZATION TYPE – authorization type (possible values: NONE, SSL or TLS).