Page History

...

1. At the manager station, in the «Service – Stations and Devices» reference, create a cash station for your previously created cash server. Assign a unique network ID to it, f.ex. RK7CASH3001_01. You can also leave the name generated automatically by the system.
2. In the «OS type» field, select Windows; in the «Station type» field, select «Cash station». Save the changes.
3. Add a video driver on the «Drivers» tab (right-click) -> Drivers list -> Video Driver group Videodriver  -> Windows Video Driver (Window Mode). Set the station as active and save the changes.

4. Connect a printer to the cash station. In the «Printer destinations» field, select a printer for bills and receipts.

   Note
   If the «Printer destinations» field is inactive, it means that printers have already been assigned at the restaurant level.

5. In Wincash.ini, specify the following parameters in the [Config] section:

   Code Block
   language delphi firstline 1 linenumbers true
   Station = RK7CASH3001_01 ; the cash station network ID, according to item 1 Server = MIDSRV3001 ; the cash server network ID

6. Launch the cash station — use Wincash.bat.

...

Below, some summarized information is provided for understanding the principles of connecting external devices (printers, fiscal registers, scales, barcode scanners, etc.) to the cash station.Important: almost

...

...

Thus, you should proceed as follows:

1. First, connect the device physically. If it is a connection via the COM port, you should find out the port number.
2. At the manager station, under in the "Settings «Service – Stations and devices" directoryDevices» reference, add a port from the list of drivers to the device tab of the cash station (I/O port = COM for Windows). Specify the port number in the "Device «Device Name =  COMX" X» property, where X is the port number.
3. After that, assign Assign the required device from the driver list of drivers (ef.gex., a printer from the "Printer" «Printer» group) to the selected port by drag-and-dropping it from the driver list of drivers to the relevant required port. Before linking, you will see a " connector " icon appears against the port, where the device is connected to.
   

   Ниже приведена обобщенная информация для понимания принципа подключения периферийных устройств (принтеров, ФР, весов, сканеров ШК и др.) к кассовой станции.
   Важно: практически каждое устройство ввода информации в менеджерской станции физически и логически подключается к порту — COM или Print to TCP/IP.

   Поэтому порядок действий следующий:

   1. Сначала подключаем устройство физически. Если это подключение через COM-порт, то необходимо выяснить номер порта.
   2. В менеджерской станции в справочнике Сервис - Станции и устройства для кассовой станции на вкладку устройства добавляем из списка драйверов порт (I/O порт - COM for Windows). Прописываем № порта в свойстве "Device Name = COMX", где X-номер порта.
   3. Далее вешаем на данный порт опять же из списка драйверов необходимое устройство, например принтер (группа "Принтер"), перетаскивая его из списка драйверов на нужный порт (Drag&Drop). Перед состыковкой вы увидите значок "коннекотора" напротив порта, к которому соединяется устройство.

Fig. Adding an Epson printer to the COM port.

1. 
   Image Added
   
   
2. Then, the system will suggest you adding a logical "Printer" «Printer» device, which will further take part in the configuration of bill and pre-check receipt printing configuration. Click OK.

3. Make

   You should make

   the logical printer active, and

   can

   rename it (optionally). Logical printers are listed on the

   "Printers"

   «Printers» tab. The

   communication

   link with the printer driver from the

   "Devices"

   «Devices» tab is specified in the

   "Main

   «Basic –

   Module"

   Module» field.

   Info

...

1. Multiple logical printers can have the same module. This feature can be useful in further operation,

...

1. f.

...

1. ex., for separating the printing of different document types at the same cash

...

1. register.

...

1. Image Added

2. Do not forget to save all your the changes.

...

...

...

...

...