Page History

...

1. XML-int.: address — the IP address of the cash register server
2. XML-int.: port — HTTP port of the cash register server
3. RK7: login — the name of the user from the HTTP-Access group
4. RK7: password — this user's password
   
5. Click Verify. The system will check the connection and display a message, depending on the result.
   1. ​If the data is entered correctly, a message about the established connection will appear:
      
   2. If login or password are incorrect, you will see the Unauthorized error:
      
   3. An error occurred while sending the request means that the cash server connection data is incorrect. Check the IP and connection port.
      
6. After successful connection, the code of the restaurant and the cash register will be downloaded from the cash server. Select the required cash desks, from which you want to receive orders, in the Cash desk code field. field
   Image Added
   If cash desks are not displayed, click Refresh
7. Optionally, specify the logging level and the synchronization frequency with r_keeper_7
8. Click Save
   Image Added
   
9. Connection The connection setup is complete.!

Update

The Guest Screen is updated via the installer.
If you have version 0.0.0.x installed, be sure to delete the gs.db database file. It It is located in the root folder of the installation with GuestScreen.exe

Run the installer, the system will detect the old version and offer to update it:

Settings Import

...

After the update, you need to download a new standard template. Download the template file from the FTP server using the link : ftp://ftp.ucs.ru/rk7/other/Guest_Screen/. The template file has the has the .exp extension, for example, GS-UCS-0.0.1.33.exp.
Open GS and go to settings, tab Common.
Image Added

Select the template file in the Upload Template and SettingsImport settings field. Check both boxes and click Import: !

The standard templates will be loaded into GS.

...

Display Settings

In the settings, select select the Screens section section.

Here you can select the monitor to display the content and the resolution.
Image Added

Standard Settings

There are several concepts describing content display on the screen in GS:

• Modes — this is the operation mode of operation of the cash register;
• Scenarios — a sequence of conditions under which scenes will be shown;
• Scenes — design of the content that will be shown according to the scenarios.

GS has default ready-made modes by default:

• Standby mode (before registering the cashier registers)
• Order. Creating a new one
• Screen work with not running the cash desk How the screen works with a cash register that is not running
• Order. Dishes not selected
• Order. Adding Add dishes mode
• Order. Calculation and payment status
• Order. Receipt printingPrint check

And scriptsscenarios:

• Mode1 – Standby mode. It – Standby (before registering the cashier). It is applied to the checkout where there is no user authorization.
• Mode11 – Order. Creating a new one. Displays an image when the cash register is available and ready to accept the order;
• Mode18 – Operation of the screen with an empty cash register– Screen work with not running the cash desk. Displays the image on the screen when the connection with the cash register is lost;
• Mode2 – Service mode (cashier is registered). Activated when the user is logged in at the checkout;
• Mode32 – – Order. Dish adding Add dishes mode. Displays images of dishes on the screen when they are added at the checkout;
• Mode4 – payment Payment scenario. Displays the order receipt with the total payment amount;

Scenes

Scenes are mean content that is shown according to the scenario conditions of the scenarios. AccordinglyThus, create scenes should be created before creating scriptsscenarios.

1. To create a scene, go to to the Scenes section
2. Click Add Add Image Added
3. Enter the name of the scene and select its type. It is possible to add videos. The video should be located at \Front\media\video. Its size depends on the computer's capacities. If the video slows down during playback, it means that the video size is too large for this computer.
   Image Added
4. Upload the selected content. For example, choose the type of scene — The imagethe Image scene type. Download the file by clicking Select an image
   Image Added
   
5. Click Browse Visibility and select the file on your computer. The file will be uploaded to GS. Click on the desired image with the mouse.
   Image Added
6. Adjust the display settings: stretch, alignalignment, size
   Image Added
7. Click Image Added to create a scene.
8. The scene is ready, you can move on to creating a script.

...

Make sure that you have all the default scriptsscenarios. After installation, there should be 6 of them. If there are no scripts scenarios or they are partially installed, you need to to import standard templates.
Consider the the example of the Order mode32 scenario scenario, i.e. the dish adding mode of adding dishes. Go to the the Scripts section section and click on the pencil next to the script you want:!

You will be taken to the script editing window. Here you can create and delete content display conditions. The conditions are checked sequentially from top to bottom and the first suitable one will be met.

...